Attic Tent - Attic Stair Insulation & Attic Door Insulation in ONE Easy Do-It-Yourself Step.

The Attic Tent model AT-2 & AT-4 Solves on of the most common problems in most homes:

Uninsulated and leaky attic ladder stairs. What is the problem? Your attic door provides two ways for your home to loose valuable energy. First, it is basically a hole in the ceiling allowing air to pass through. Newer homes require the attic door to be sealed, but on older homes the attic staircase usually allows air to easily pass through. This is no different than leaving a window partially open. Secondly, most attic stairs are not insulated. This provides a channel for heat to easily pass through. It is essentially a "bald spot" in your attic floor insulation. This is known as Thermal Bypass. The Attic Tent is only intended to be use on staircases WITHIN the air conditioned living space (not needed for garages)

Product Name:	Cost	Buy
Attic Tent Model AT-2 - 25" x 54" x 7"	148.95
Attic Tent Model AT-4 - 25" x 54" x 13"	$174.95

How does it Work?

The Attic Tent boths SEALS and INSULATES the Attic Stairs in ONE Step. The engineers at InsulSure solved the problem of attic stair air transfer/loss from the perspective of the homeowner. They designed a product that not only significantly reduces air loss, drastically lowering your energy bill, but also provides safe and easy zipper accessibility into your attic. It also keeps blown insulation up in the attic where it belongs, not on your floor, each time you open your attic stair door.

Can I install the Attic Tent myself?

The Attic Tent is easy to install in about 10-15 minutes. Anybody can install an Attic Tent. Installation is simple: 1) Staple skirt around stair case (instructions included) and 2) Caulk to seal skirt to wood frame. See Install Instructions Below

How to Save Energy?

There are two things you can do yourself to save energy in your home. Install Radiant Barrier and seal leaks into your home. The most common air leakage points are can lights, or recessed lights, leaks around windows and doors and the attic door or attic staircase. The Attic Tent will seal and insulate the attic staircase.

What Size?

We sell TWO MODELS: The AT-2 and AT-4. The most popular size is 25" x 54" x 7" Attic Tent Model AT-2. This the size needed for most standard size attic stairs. Measure the distance across, it should be about 25". The attic tent sticks up in the attic about seven inches. Combined with the thickness of standard ceiling joist of 5 1/2 inches you will have enough room for a standard triple fold attic staircase. The AT-4 is 13' TALL. It has more clearance for latters that stick up further into the attic. Visit the manufacturers website for more info on sizing www.AtticTent.com

Product Name:	Cost	Buy
Attic Tent Model AT-2 - 25" x 54" x 7"	148.95
Attic Tent Model AT-4 - 25" x 54" x 13"	$174.95


Measure to determine if the AT-2 is the right model for your attic staircase. "Standard" stairs are 24" wide and 54" long. We only sell the most popular model AT-2. The "rough" opening or space between the framing should be about 25" x 54". If the opening is within a couple of inches of these measurements, it will fit. The stapling "skirt" is about 2 inches wide to compensate for variances.	Determine where you are going to staple the skirt. Ideally, you will staple to the frame around the top of the stair opening.	If you have decking or and uneven spot, use your staple gun and follow the contour of the opening. The main goal is to create a continuous connection between the attic tent and the opening of the attic staircase. USE 3/8" or 1/2" Staples.

If you have too many obstructions, you can staple to the inside of the framing. You will have some excess material in the corners. Just staple the excess to the framing.	Stand at the top of the stairs. Position the Attic Tent so the opening where the two zippers come together is at the top of the stairs.	Position the Attic Tent on top of the framing. Be sure to position so that you will have a solid frame to staple all around.

Put ONE staple on EACH corner to hold in place. Pull gently to make sure the Attic Tent is flush with the top of the framing. Remove staple and reposition if needed.	Put one staple in the MIDDLE of each side to line up skirt with the frame. Ideally you will put the staple in the middle of the skirt. This will enable you to easily caulk the skirt to the fram later.	Then proceed stapling all around the skirt about every 2 inches until complete. This completes the "attachment" part. Now let's insure the attic door is airtight.

Caulk the Attic Tent to the framing. Use a good quality silicone caulk. Insert the tip between the Attic Tent skirt and the framing. Squeeze a continuous bead around the frame. Gently press the skirt into the caulk to insure a continuous seal.	Now use caulk and seal the corners of framing and plywood decking to framing if you have decking.	The last step is to seal between the attic staircase and the framing. This is best done with a disposable can of expanding foam like "Great Stuff". Follow directions on the can. Fill the cavity between the frame and the attic door from the bottom (sheetrock) about two thirds. It will expand up and beyond the top of the frame.